Pullner High Flow Rate 5 Micron 40inch 60iinch Beta 5000 Pleated
Filter Cartridge
General Information
PHFL Pleated Filter Cartridge series high flow filter cartridge is made of diameter 6inch(152mm), single
open end, without inner core, pleated type with inside to outside
flow direction. All connection use thermal welding. Large diameter,
big filtration area provide high flow rate, highly efficient
particle filtration in RO pre-filtration system. Widely used in
seawater desalination and power plant condensate polishing water RO
pre-filtration.
Applications:
General Purpose: RO Pre-filtration, all kinds process water
purification;
Petrochemical: Various solvents, chilled water, brine filtration;
Power Plant: supplementary water, condensate water, coolant.
Industrial filtration: Process fluid, process water, condensed
water, coolant, wastewater treatment;
Food and Beverage: Process water;
Features and Benefits:
* Inside to outside flow direction keeps all of the contamination
catched;
* Gradient aperture deep polypropylene fiber filter media, aperture
along the fluid motion direction becomes smaller, levels intercept
different sizes particles, which has excellent dirt holding
capacity and low flow resistance.
* 40” outer cage is one piece, with high strength can withstand one
adult weight, ensure big effective filtration area, long life;
* Easy installation save, less cartridge change out help customers
save the labor cost;
* Integral support, high strength, high dirt holding capacity, long
service life;
* Single cartridge could achieve flow rate 110m3/h;
* Filtration efficiency reach 99.8%;
* Strict quality control system, complete production process flow;
* Short delivery period;
* Free technical support;
* MOQ 1 piece;
* FREE sample.
Dimensions(nominal)
| OD | 6inch (152mm) |
| Length | 20inch(508mm), 40inch(1016mm), 60inch(1524mm) |
Material of Construction:
| Model | Filter Media | Support/Drainage | End Caps | Seals Material |
| PP | Pleated depth | Polypropylene | Glass Fiber Reinforced Polypropylene |
NBR, Silicone, EPDM, Viton
|
| PP | Melt blown | / | Glass Fiber Reinforced Polypropylene |
Flow Characteristics:
Length (inches) | Design Flow Rate (m3/hr) | Max. Flow Rate (m3/hr) | Filtration Area (m2) |
| 20" | 15 | 30 | 3.2 |
| 40" | 20 | 60 | 6.5 |
| 60" | 45 | 90 | 9.5 |
Retention efficiency Table
| Scope of particles | Filtration Efficiency |
| 0.8μm | 1.0μm | 2.0μm | 3.0μm | 5.0μm | 10μm | 20μm |
| ≥1μm | 99.89% | 99.82% | 95.00% | 86.97% | 79.86% | 42.23% | 24.38% |
| ≥2μm | 99.97% | 99.87% | 98.64% | 96.84% | 90.09% | 70.49% | 40.09% |
| ≥5μm | 100.0% | 99.93% | 99.90% | 99.89% | 99.89% | 99.89% | 99.89% |
| ≥8μm | 100.0% | 100.0% | 99.97% | 99.20% | 98.88% | 95.25% | 82.42% |
| ≥10μm | 100.0% | 100.0% | 100.0% | 99.58% | 98.39% | 98.18% | 89.42% |
| ≥12μm | 100.0% | 100.0% | 100.0% | 99.78% | 99.57% | 98.76% | 97.41% |
| ≥25μm | 100.0% | 100.0% | 100.0% | 100.0% | 100.0% | 99.34% | 99.14% |
High Flow PP Water Filter Cartridge Details:
Pullner Production process:
Our production strictly follow these procedures: Pleating → Seam
welding → Assembly → Trimming → Welding → Finished products → Packaging
Clean Room:
In the purification workshop, workers need to wear purification
clothes, purification shoes, masks, hats and gloves. The
purification workshop has high requirements on the production
environment, which can ensure the cleanliness and safety of the
products, and can meet the filtration requirements of food and
beverage, biopharmaceutical and other industries.
Pullner laboratory:
It is equipped with varieties of test facilities: Aperture
distribution instrument, water single-pass test bench, scanning
electro microscope, bacterial challenge lab, online particle
detector, diaphragm test bench, air permeability tester, filter
cartridge integrity tester, test trolley for simulating field
conditions, etc. With several test experts, quickly provide
customers varies conditions solutions.
Pullner Exhibitions:
We have participated in professional exhibitions in the filtration
industry all the year round. At the exhibition, we not only met new
customers and their product needs, but also gained more
understanding of the latest filtration technology and products. For
us to improve existing products and develop new Products provide
more professional information.
1. Q: Are you a trading company or a manufacturer?
A: We are a professional manufacturer of all kinds of filter
cartridges, housings and filtration systems. We provide you the
total filtration solutions with our many years experience in the
industry.
2. Q: May I have samples?
A: Sure, of course. Sample cost can be refunded if you place formal
orders in the future.
3. Q: Can you make customized products?
A: Yes, of course. if you can provide us detailed specifications or
drawings. Our mission is make customer idea on the products and
provide the customer satisfied solutions.
4. Q: Can I use our own designed package?
A: Yes, size, color, logo and packaging style all can be
customized.
5. Q: What's your MOQ?
A: Normally, 100PCS/item. Any trial order which is less than MOQ is
warmly welcomed. If you have a trial order, please feel free to
contact us so that we can make some shipping recommendation for you
to save the cost based on the quantity you need.
6. Q: I am a small business owner, Can I buy from you?
A: Yes, you are warmly welcomed. To grow with our customer is our
goal. We would like to grow with you together.
7. Q: What is your general lead time?
A: Normally 5-7 working days for off-the-shelf samples and 10~15
days for bulk production.
8. Q: How should I pay you?
A: T/T, L/C, Western Union, MoneyGram, etc are acceptable.
9. Q: What certificate do you have?
A: Our factory is ISO9001/ISO14001/ISO45001 certified.
10. Q: How should I place an order?
A: Please kindly click "Sent Inquiry", Then our sales engineer will
recommend you suitable products for your selection also give some
valuable suggestion for your selection.
